Table of Contents
Advertisement
> Sew the required length of the buttonhole.
– Step 2 is activated.
> Stop when the required length of the bead or the length marking is reached.
> Step 3 appears by tapping «Scroll Down».
> The machine sews the curve or the eye and stops automatically.
> Step 4 appears by tapping «Scroll Down».
– The machine sews the second bead in reverse.
> Stop the machine at the level of the first stitch where the buttonhole begins.
> Step 5 appears by tapping «Scroll Down».
–
The machine sews the upper bartack and secures automatically.
9.11 Sewing a Buttonhole automatically with the Buttonhole Foot with
Slide #3A
When the Buttonhole Foot with Slide #3A is used, the length of the buttonhole is measured automatically by
the lens on the presser foot. The buttonhole will be exactly duplicated and the machine switches to the next
step automatically when the maximum length is reached. The Buttonhole Foot with Slide #3A is suitable for
Buttonholes
87
Advertisement
Table of Contents
