Vulcan-Hart GR Series Service Manual page 30

GR Series Gas Fryers with NCC Controls (formerly Tridelta / Built after 3/05) - SERVICE PROCEDURES AND
Program Item
• Press and hold 6 to light all display
elements.
• Press 7 to test ignition status input. Turn
valve on/off, and press 7 again to update
display.
Gas valve on.
Gas valve off or ignition module lock out.
• Press 6 to view the cooking cycle lock out
temperature (always °F). To edit, enter the
Temperature
desired lock out temperature (rand 0 to
Ready Level
99°F).
• Press 8 to enter the More Service
More Service Programming. To edit one of the
Programming selections, enter the number desired. To
Level exit a selection, press V to accept and
return to More Service Programming.
• Press 4 to view or edit the Shake Alarm
duration: 0-98 seconds; 99-continuous
alarm until canceled manually.
• Press 5 to view or edit the Hold Alarm
duration: 0-98 seconds; 99-continuous
alarm until canceled manually.
• Press 6 to view of edit the Cooking cycle
cancel delay; 0-10 seconds.
• Press 7 to view or edit the number of
basket lifts.
Press Toggle key to select the number of
basket lifts.
0 = none; 1 = one lift; 2 = two lifts.
• Press 8 to view or edit the fryer's Energy
Source, electric or gas heat.
Press Toggle key to select the fryer's
Energy Source, electric or gas heat.
F35660 Rev. A (0717)
ADJUSTMENTS
Key Sequence
2
3
4
Page 30 of 56
LED Status
ON OFF
all
5, 7
5, 7
5 7
all
4, 5, 6,
7, 8
all
5 6
all
6 7
8
Display
Left Right
*.*.*.*.*.*.*·*·* *.*.*.*.*.*.*·*·*
PILOT ON PILOT ON
PILOT OF PILOT OF
READY40F
MORE SERVICE
DT-DUR05 DURATION
HD-DUR.·05 DURATION
CANCEL.·01 DELAY
LIFTS 0, 1, or 2
ELECTRIC or
FRYER
gAS