Specifications - Vulcan-Hart GR Series Service Manual

GR Series Gas Fryers with NCC Controls (formerly Tridelta / Built after 3/05) - GENERAL
• Left and Right displays that indicate actual or set
point temperature, remaining times, operating
modes, and completion of preheat period.
• Two LED lamps on the Oil Temp key that indicate
heat on and tem individual LED lamps above
each of the ten product/programming keys? LED
lamps blink when a product key is activated, and
are solid when using a key for programming.

SPECIFICATIONS

Electrical
• 120 VAC supply. A 24 VAC transformer provides
power for the fryer controls, basket lift controls (if
installed) , and the filtering controls on
Kleenscreen battery fryers.
Gas Pressures
Manifold (per fryer section):
F35660 Rev. A (0717)
COMPUTER CONTROL (OLDER), C MODEL
Fig. 4
COMPUTER CONTROL (NEWER), C MODEL
Fig. 5
Page 8 of 56
• Filter Key - Starts pump motor to circulate
shortening through the filtering system.
• Natural - 4" W.C.
• Propane - 10" W.C.
Binding supply pressure (min):
• Natural - 5" W.C. (7" W.C. battery units)
• Propane - 11" W.C. (12" W.C. battery units)
NOTE: Propane or Natural gases - 14" W.C. (max).
Input BTU Rating