Siemens SIMATIC ET 200SP Manual page 12

Product overview
2.1 Properties
The module can be used with the following engineering tools:
Table 2- 2
Firmware version
of the module
V1.0
(in PROFINET
station)
V1.0.3
(in PROFIBUS
station)
V2.0
V2.1
V2.2
Accessories/spare parts
The following accessories / replacement parts are available for the module and are not
included in the scope of delivery:
● Labeling strips
● Color-coded labels
● Reference identification label
● Electronic coding element type H
See also
You can find more information on accessories in the ET 200SP Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/58649293) system manual in the
Accessories/Spare parts section.
12
Engineering tools depending on the firmware version of the module
S7-PCT
V3.0 or higher
V3.1 or higher
V3.2 or higher
As of V3.3 and
SupportedModules.xml
V1.2
V3.5 or higher
Communication module IO-Link Master CM 4xIO-Link (6ES7137-6BD00-0BA0)
STEP 7 STEP 7 V5.5
(TIA Portal)
V12 SP1 or As of V5.5 SP3 with
higher HSP0231 as of
V13 or higher As of V5.5 SP3 with
HSP0231 as of
As of V13 As of V5.5 SP3 with
(Time-based IO HSP0231 as of
only with CPU
S7-1500) (without
Time-based IO)
As of V13 SP1 As of V5.5 SP4 with
with HSP0136 HSP0231 as of
as of V1.0
(Time-based IO (without
only with CPU Time-based IO)
S7-1500)
V15 or higher V5.5 SP4 or higher
(without time- with HSP0231, V4.1
based IO) or higher
(without
time-based IO)
Manual, 10/2017, A5E03856846-AD
GSD file
X
V1.0
X
V1.0
X
(without
V1.0 time-based IO)
X
(without
V4.0 time-based IO)
X
(without
time-based IO)