Siemens SIMATIC ET 200SP Manual page 11

Properties
The module has the following technical properties:
● IO-Link master according to IO-Link specification V1.1
● Serial communication module with 4 ports (channels)
● Data transmission rate COM1 (4.8 kbaud), COM2 (38.4 kbaud), COM3 (230.4 kbaud)
● SIO mode (standard IO mode)
● Suitable for connecting up to 4 IO-Link devices (3-wire connection) or 4 standard
actuators or encoders
● Programmable diagnostics function by port
● Automatic backup of the master and device parameters via electronic coding element
The module supports the following functions:
Table 2- 1
Function
Firmware update
Identification and maintenance data (I&M)
PROFIenergy
IO-Link port configuration with S7-PCT
Module replacement with automatic data recovery without
engineering for IO-Link master and IO-Link device
Time-based IO (time stamping)
Variable address range of I/O data with up to 32-byte inputs and
32-byte outputs
Variable address range of I/O data with up to 144-byte inputs
and 128-byte outputs
IO-Link port configuration without S7-PCT
Master Backup with function block IO_LINK_MASTER
PortQualifierInformation (PQI)
Communication module IO-Link Master CM 4xIO-Link (6ES7137-6BD00-0BA0)
Manual, 10/2017, A5E03856846-AD
Version dependencies of the module functions
Product overview
2.1 Properties
Firmware version of the module
V1.0 or higher
V1.0 or higher
V1.0 or higher
V1.0 or higher
V1.0 or higher
V2.0 or higher
V2.0 or higher
V2.1 or higher
V2.2 or higher
V2.2 or higher
V2.2 or higher
11