Calling And Printing Logos - TEC EM1-31071 Owner's Manual

14. OPERATING PROCEDURES

14.8 CALLING AND PRINTING LOGOS

When the initial setting #10-7 is set to "1", a logo containing a picture, a mark, a POP message etc.,
can be printed on the ingredient label having 12 lines or more for printing ingredient message.
Logo data is created on the PC and stored into the memory through the CMT/PL-3 interface.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
Press:
Enter the logo #.
(1 to 26)
Press:
NOTES: 1. The logo # will be effective until it is changed or deleted.
(Logo # is still effective after turning power off and/or changing mode.)
2. Pressing the PRT/* key returns the display to the initial display of Weight mode.
This clears the unit price and tare data.
3. LOGOs will not be printed together with a safe handling instruction on a label.
4. LOGOs will be printed in the center of a label.
LOGO
1 0
PRT
*
Start the label issue operation.
or
0 C
14-13
14.8 CALLING AND PRINTING LOGOS
Select the LOGO type
(Normal F.Shopper).
< >
Clear the entered
logo #.