Removal And Replacement Of Media - TEC EM1-31071 Owner's Manual

Electronic computing scale
Table of Contents

Advertisement

9. REMOVAL AND REPLACEMENT OF MEDIA

9. REMOVAL AND REPLACEMENT OF MEDIA
Since there is a cutter at the paper outlet, be careful not to injure your fingers when
replacing media.
CAUTION: Do not hold the label cassette by the portion A. Doing so may deform the label
1. Open the right cover. Then push the head-up lever in the direction indicated by the arrow.
Head-up Lever
2. Pull out the label cassette.
3. Pull out the roll stopper and the backing paper stopper, and remove the media core with
backing paper.
NOTE: When removing the backing paper, loosen the paper by turning the paper winding shaft
counterclockwise.
cassette, causing damage when setting it in position. Please be sure to hold
the label cassette as the following figure shows.
A
WARNING!
Backing Paper
9-1
9. REMOVAL AND REPLACEMENT OF MEDIA
Label Cassette
Roll Stopper
Backing Paper Stopper

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents