Page 1
Owners Manual TEC LOAD CELL SCALE (WITH LABEL PRINTER) MODEL SL57 SERIES (US. Version) Table of Contents TOKYO ELECTRIC CO., LTD.
Page 2
WARNING This equipment generates, uses, and can radiate used in accordance with the instruction communications. It has been tested and found computing device pursuant to Subpart provide reasonable protection against such interference environment. Operation of this equipment in which case the user at his own expense be required to correct the interference.
Page 4
INTRODUCTION thank very much This series been designed investment. SL57 (with thermal Because of this, decreased store. Your deli, specialty departments operating effectiveness and watch electronic Load Cell scale eliminates information. believe that your needs calculation. This manual will help scale.
4. KEY ARRANGEMENT Unit Price Preset Keys Department NOTE: characters indicated convenience of explanation shown in this illustration. 5. KEY AND LAMP FUNCTIONS Name of Key or Lamp CLEAR DATE & TIME DEPARTMENT Keys 8 keys FEED Keys on the Unit Price Preset...
Page 8
Name of Key or Lamp 1. This 2. In “X/Z” “WEIGH Mode Switch 1. This WEIGH 2. This FIX(Z) BY COUNT{ PROGJ “FIX 1. The 2. This “BY COUNT 1. It is possible 2. This “AUTO” Mode Switch 1. This AUTO MANUAL 2.
Page 9
Name of Key or Lamp POWER/ZERO POWER /ZERO PRINT/VERIFY PRT/+ PROGRAM PROG. SAVE Key SAVE TARE Key UNIT PRICE PRESET Keys n-l--J NET Lamp PREPACK Lamp ERROR Lamp This key is used to supply power “ZERO” point. 1. This key has the function of label issue.
6. LEVEL ADJUSTMENT Set the Level center figure, Correct Incorrect bubble Adjusting Legs 7. CLEANING THE PRINT If the print head is dirty, clear printing head cleaner everyday, before thermal head cleaner. Then label, push head. NOTE: Do not damage cleaning.
8. REMOVAL REPLACEMENT 1. Remove printer cover Then pull head-up lever 2. Remove the core of the label backing paper. NOTE: remove label loosen paper clockwise stopper. careful never winding shaft clockwise. Referring to the figure on the roll on the unit.
9. NOTES BEFORE STARTING Be sure to insert power (2) When power is turned OOOO,OOOO,OOOOO, then 1 1 1 1,l key is turned on over about appear on all displays a moment, (3) While scale is in the test sequence, Do not move unit...
10. OPERATION PROCEDURES 10.1. Weighed Article Registration Auto Mode [Mode (2): AUTO Press unit price preset key ot’ entel unit price. ex.) Unit price of S 2.50/lb. (2) Place an article on the platter. (3) The label is issued automatically. Manual Mode [Mode...
1 O-2. Price Registration + Auto Mode [Mode (2): AUTO (1) Press unit price preset key or enter unit price. ex.) Unit price of s 3.00/lb in preset Place an article on the platter. (3) The label is issued automatically. + Manual Mode [Mode...
10-3. By Count Registration General ODeration Enter quantity of sale. (Max. 2 digits) Press Enter total price or press preset key. Press or department for the article. When Mode SW.(2) is set to MANUAL position, single is issued. When Mode SW.(2) is set to AUTO...
Page 16
Split Price Operation Enter quantity of sale. (Max. 2 digits) Press jFOR[. Enter quantity that price. (Max. 2 digits) Press !FORI (5) Enter total price or press preset key. Press or department article. (7) The label is issued. total mm JUL 25 sunAU6 04 - 13 - WEIGHT U.
1 O-4. Tare Function Procedures There are two kinds of tare subtraction -f Direct Tare Subtraction Place tare weight on the platter. Press Start weighing operation. (4) The label is issued. (5) Remove article together tare. NOTE: Tare weight subtraction operation, however, (Net...
Page 18
Preset Tare Subtraction Enter tare weight. ex.)Tare weight of 0.50 Ibs. Press Place tare of 0.50 platter. Start weighing operation. Sr Preset Tare Subtraction Enter tare weight. ex.)Tare weight of 0.50 Ibs. Press Place tare of 0.50 platter. (4) Start price operation.
1 O-5. Save Function Procedures Save is used to save tare platter. Sr Weighed Article Mode Saving Place tare weight on the Press key. Enter unit price. Press key. Tare Price saved. Place an article ex.) Weight of 2 Ibs. When Mode MANUAL...
Page 20
Price Mode Saving [Mode Enter tare weight. Press key. Enter total price Press key. Tare weight Total Price saved. Place an article together with ex.) Aticle of 5 Ibs tare 0.50 Ibs. (6) When Mode (2) is set to MAN- Press iPRT/+ position,...
10-6. Unit Price l/2,1/4 Enter unit price. Press key. Place an article on the platter. (4) When Mode (2) is set to AUTO label position, automatically. or Per Press unit price preset key. ex.) Unit price of s 0.75/lb in preset Press key.
10-7. Date Change [Mode SW.(2): date be changed temporarily. Press PDT/TM key. Enter date ex.) Aug. 10th. ‘87 Press [PRT/+] + When original date is desired. Press [DT/TM key. Press key. Press jPRT/w key. AUTO or MANUAL] (Finish) T . PRICE Current setting date...
10-8. Shelf Life Date Setting With SL57 system, shelf Press [DT/TM] key. Press key. Enter shelf life date. (Max. 3 digits) Press vPRT/ key. 10-9. Print Test Label [Mode At the “X/Z PROG.” position, within print matrix. Please, check condition of thermal [Mode SW.(2):...
11. TOTAL OPERATION READ (X) reports allow to read to read totals at the have been issued. 1 l-l. Individual Department Press required department key. (2) The report is issued. 11-2. Grand Total Read [Mode Press key. (2) The report is issued.
11-3. Individual Department Press required department key. (2) The reset report is issued. 11-4. Grand Total Reset [Mode Press key. (2) The reset report is issued. Then resettable memories cleared Reset [Mode (1): (211 Chicken #l I =mJUL 25 DPT-2 32.12 El wl.D3 s 149 Milton...
12. PROGRAMMING PROCEDURES In this chapter are described “PROG”mode. To enable the programming SW.(l) and the “X/Z PROG.” 12-l. Date and Time Setting ex,) To set the date “July 25th. Mode SW. (1): BY COUNT (PROG.)- Mode SW. (2): X/Z PROG.
12-4. Address or Message Programming (Store Address, Telephone No., ex.) To program address Mode (1): BY COUNT (PROG.) Mode (2): PROG. (Space) b’4 NOTE: to 26 small-sized 12-5 Print Item ON/OFF Setting This operation specifies whether or not. ex.) To non-print “PACKED Mode (1):...
Page 28
Table 1: Character Code Table Code First enter Column code “A”, enter 40 1. Column Code 23456789 00SP ’ JZ.izCEO II+; <L\ then code for the required - 25 - (fi-+ character. For example, to access...
13. ERROR MESSAGE TABLE Take the following action if an error sounding. Message Print head label label is not sensors. label sensors. 14. BEFORE CALL It is our primary concern to give in connection with operation calling service: Is the power plug fully...
Page 30
TEic PRINTED IN JAPAN El-04316A 9509100@...