Free Format Setting - TEC EM1-31071 Owner's Manual

11. PROGRAMMING PROCEDURES

11.20 FREE FORMAT SETTING

Menu Group: 3
Item No.:
When using 57-mm wide labels, up to three print formats can be changed freely. Moreover,
characters can be rotated and magnified, and print items are salectable.
Enter the coordinate of each print item's lower left corner using the lower left corner of a label as
the origin. When a print item is located beyond the label width, an error will occur.
Key functions
ENTER
a. ROT (Rotation) :
b. MAG (Magnification) :
c. PRT (Print) :
<MENU>
Group 3
1
: Moves downward (Data is stored.)
: Moves downward (Data is stored.)
: Moves upward (Data is stored.)
: Moves to the right
: Moves to the left
: Selects a setting
Liquid Crystal Display
ON
OFF
t
1
1
Select data format
Select a print item
to be re-located.
Liquid Crystal Display
0
90
180
270
0: normal
1: X2 (width)
2: X2 (height)
3: X4 (width: X2, height: X2)
ONP
OFFP
Printing Item
or
ENTER
Change the
coordinate.
(See NOTE 5)
11-29
11.20 FREE FORMAT SETTING
0R
90R
180R
270R
Printing Item
Liquid Crystal Display
TEST
Tset print
0M
1M
2M
3M
Printing Item
<MENU>
PROG.
Group 3
Main
ESC.
<MENU>
t