Calling And Printing Logos - TEC SL-9000 Owner's Manual

14. OPERATING PROCEDURES
14.8

CALLING AND PRINTING LOGOS

When the initial set #10-7 is set to "1" (or "2": SL-9000N only), a logo containing a picture, a mark, a
POP message, etc., can be printed on the ingredient label having 12 lines or more.
Logo data is created on the PC and stored into the memory through the CMT/PL-3 interface.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
Press:
Enter the logo #.
(1 to 26 or 1 to 99)
Press:
NOTES: 1.
2.
3.
4.
5.
LOGO
1
SL-9000N only
PRT
Start the label issue operation.
The logo # will be effective until it is changed or deleted.
(Logo # is still effective after turning power off and/or changing mode.)
Pressing the key returns the display to the initial display of Weight mode.
PRT/*
This clears the unit price and tare data.
LOGOs will not be printed together with a safe handling instruction on a label.
LOGOs will be printed in the center of a label.
LOGO # "1 to 26" or "1 to 99" is selectable with the initial setting #10-7. (SL-
9000N only)
Select the LOGO type
◇
(LOGO (1)
0
0 or
*
14-13
14.8 CALLING AND PRINTING LOGOS
LOGO (2) F.Shopper)
SL-9000N only
Clear the entered
C
logo #.