TEC EM1-31071 Owner's Manual page 47

11. PROGRAMMING PROCEDURES
Table4 : Transmission Item List
ITEM #
Liquid Crystal Display
2 VERIFY PLU & ING
3 READ PLU & ING
4 WRITE PLU TO CMT
5 VERIFY PLU = CMT
6 READ PLU FM CMT
7 WRITE ING TO CMT
8 VERIFY ING = CMT
9 READ ING FM CMT
10 WRITE NUTRITION
11 VERIFY NUTRITION
12 READ NUTRITION
13 WRITE SPEED KEY
14 VERIFY SPEED KEY
15 READ SPEED KEY
NOTE: When transferring data with the PL-3, required FDK varies depending on the amount of ING.
Be careful of the following when changing a FDK.
a: During write operation, replace the FDK with a formatted one.
b: Verify and read data in the same order as write.
To cancel FDK change, press the CLEAR key.
Title on the Display
7 seg.
Contents of Transmission
2 COMPARE PLU & ING. IN OLD FORMAT
3 READ PLU & ING. IN OLD FORMAT
4 SAVE PLU IN NEW FORMAT
5 COMPARE PLU IN NEW FORMAT
6 READ PLU IN NEW FORMAT
7 SAVE ING. IN NEW FORMAT
8 COMPARE ING. IN NEW FORMAT
9 READ ING. IN NEW FORMAT
10 SAVE NUTRITION IN NEW FORMAT
11 COMPARE NUTRITION IN NEW FORMAT
12 READ NUTRITION IN NEW FORMAT
13 SAVE SPEED KEY IN NEW FORMAT
14 COMPARE SPEED KEY IN NEW FORMAT
15 READ SPEED KEY IN NEW FORMAT
11-20
11.12 CMT/PL-3
CMT
: operable, : inoperable
PL-3