L- 11. Setting Automatic Display Switching Time - TEC EMl-31055 Operation Manual

EMl-31055
1 l-l 1. Setting Automatic Display Switching Time
When initial set #6-4 is set to "2" (standard), it is available to specify the time before a scrolling
message appears automatically on hte commodity name display after a label has been issued
or after "ENTER THE PLU#" has been displayed.
Control lock: REG, M.DOWN, or REWRAP
Mode SW(2): WEIGH, BY COUNT, or FIX
Depress:
ENTER THE PLU #
1
PACKED ON DATE ON ]
Enter the special code "20".
Set the time.
(1 - 99 sec.)
Depress:
ENTER THE TIME
I
+
0
ENTER THE TIME
40
Current setting time
ENTER THE TIME
15
1 ENTER THE TIME 15
I I
ENTER THE PLU #
NOTE: Automatic display switching occurs provided the control lock is set to "REG.', "MARK DDWN"
or "REWRAP". It does not occur if the unit price has been saved.
-31 -