Removal And Replacement - TEC EM1-31015 Owner's Manual

EMl-31015D
IO. REMOVAL AND REPLACEMENT OF LABEL ROLL
I. Remove the printer cover and right side cover.
Then push the head-up lever in the direction
indicated by the allow.
!. Pull out the label cassette. Then remove the Label
cassette
core of the label roll and the label backing paper.
I
NOTE: To remove the label backing paper,
loosen the paper by turning the paper
winding shaft counterclockwise and
remove the paper stopper.
.~ ~~~~
3. Referring to the figure on the right, set the
label
Roll stopper
roll on the label cassette.
Backing paper stopper
5. Push down the print
head, and close the covers.
NOTE: When the label roll is replaced, press the
feed
key to
confirm that the label is issued
correctly.
- 16 -