Trouble Indications - Toshiba TLP-X10U Owner's Manual

Trouble indications

If there is some problem inside the projector,
the indicators light up or blink.
Control panel
(Main unit side)
AUTO AUTO
KEYSTONE SET
VOL/ADJ.
ENTER EXIT
MENU INPUT
ON/STANDBY
TEMP LAMP ON
BUSY FAN
TEMP LAMP
BUSY
Or
TEMP LAMP
(Lit in red) (Lit in red)
BUSY
TEMP LAMP
BUSY
Or
(Lit in red) (Lit in orange)
TEMP LAMP
BUSY
Indicator
Or
(Lit or flashing
(Lit or flashing
in red)
TEMP LAMP
(Flashing in orange)
BUSY
Note
If abnormality occurs while operating, unplug the power cord.
The power does not come on.
ON
Malfunction of the unit.
FAN
• Unplug the power cord and call the dealer.
(Lit in red)
ON The lamp turns off or does not light up.
The lamp's duration life is end, or malfunction of the unit.
FAN
• Lamp's duration life is over, replace the lamp with a new one.
86
• Unplug the power cord and call the dealer.
The power turns off or does not come on.
ON
The inside is too hot, or the projector has been working in an
(Lit in red)
FAN
area of high temperature.
(Lit in green)
• Place the projector correctly so the intake and exhaust fans'
holes are not covered.
Or
(Lit in green)
• Turn the projector off, and leave it for a while, and turn it on again.
• Clean the air filter.
* The icon
ON
The power turns off or does not come on.
(Lit in red)
Trouble with the cooling fan.
FAN
• Unplug the power cord and call the dealer.
* The icon
in orange)
ON
The power turns off or does not come on.
The lamp cover is not properly attached.
FAN
• Unplug the power cord and reattach the lamp cover.
(Lit in red)
* The icon
83
appears before the power turned off.
appears before the power turned off.
appears before the power turned off.
82
CONTENTS
87