Toshiba TLP-X10U Owner's Manual page 50

QUICK MENU adjustments and settings (continued)
Control panel
Remote control
(Main unit side)
AUTO AUTO
SET
KEYSTONE
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE SET VOL/ADJ.
L-CLICK R-CLICK
3-a
VOLUME/ADJUST
ENTER
EXIT
MENU INPUT
MENU ENTER EXIT
ON/STANDBY
PIP FREEZE
RESIZE
CALL MUTE
TEMP LAMP ON
BUSY FAN
When selecting "Contrast", "Brightness", "Color", "Phase", "Keystone", "Picture mode",
"Lamp power", "Auto. demo" or "Shutter" in step 2.
3-a
3-a
Note
The cooling sound changes according to the temperature inside the projector. When the
lamp power setting is changed, the brightness changes immediately, but the cooling sound
level does not change immediately.
Press VOL/ADJ (+/-) to adjust and set.
Adjustments
Buttons
Items
Contrast Lower
Brightness Darker
Color Thinner
Phase Adjust flickers
Keystone Reduce the lower width Reduce the upper width
Settings
Picture mode (Analog RGB input, digital RGB input)
Bright: Set the picture with its brightness priority.
True color: Set the picture with its quality (color) priority.
Lamp power
Hi: Set the lamp mode with brightness priority.
Low: Restrict the lamp output to reduce the cooling sound.
Auto. demo (Memory card input)
On: When a memory card is detected while the memory card
input mode is selected, a slide show using the image data in
the root directory starts automatically.
Shutter (Document imaging camera input)
Set to the frequency (50/60 Hz) of the power supply in your area.
CONTENTS
(-) (+)
Higher
Brighter
Deeper
Adjust flickers
Continued
50