Contents - Toshiba TLP-X10U Owner's Manual

Connecting video equipment (continued)
You can project the picture from video equipment with component video output jack.
Check that the power for the projector and video equipment is off before connecting the cables.
CONTROL USB MONITOR OUT COMPUTER IN 1
( Y/P
/P
B
AUDIO AUDIO
OUT IN
To AUDIO IN jack
Note
Some component video signal sources include the Y/C
COMPUTER IN 2
)
R
VIDEO IN
R - AUDIO - L VIDEO S-VIDEO
To COMPUTER IN 1 connector
Be sure to connect in the proper
direction.
Monitor cable
Mini D-sub 15P-BNC
(Not supplied)
/C signals of a DVD player and the Y/P
B R
COMPUTER IN 1 Connector
For use as both analog RGB1 input and Y/P
factory, it is set for use as analog RGB1 input.
Change the setting on the menu when using as Y/P
AUDIO IN jack
For use as both audio signals for RGB input (analog RGB1/analog
RGB2/digital RGB) and Y/P /P input.
B R
Video equipment with component
video output jack. (DVD player, etc.)
Adapter
BNC-pin
(Green) To Y video output
(Not supplied)
Audio cable (not supplied)
/P
B R
/P input. At shipping from
B R
/P input. 48
B R
(Blue) To P (C ) video output
B B
(Red) To P (C ) video output
R R
Pin plug (red)
To audio output (R)
Pin plug (white)
To audio output (L)
signals of high definition devices, etc.
25

CONTENTS