Remote Control; Loading Batteries; Contents - Toshiba TLP-X10U Owner's Manual

Loading batteries

Notes
Using batteries incorrectly can cause them to leak
or burst. Strictly observe the following.
• Install the batteries with their + and – ends facing
correctly.
• Do not charge, heat, disassemble, or short the
batteries or throw them into a fire.
• Do not leave exhausted batteries in the remote
control.
• Do not mix different types of batteries or new and
old batteries.
• When you will not be using the remote control for
a prolonged period, take the batteries out of the

remote control.

• When the remote control stops working or only
works from very close distance, replace all the
batteries with new ones.
• When replacing the batteries, use a more longer
life alkaline batteries.
• If a battery leaks, carefully wipe off any residue
inside the battery case before loading new
batteries.
1
2
3
Open the cover.
Install the batteries.
Make sure that the +/– polarities match the
illustration in the compartment.
Attach the cover.
15

CONTENTS