Toshiba TLP-X10U Owner's Manual page 66

FULL MENU settings – Display (continued)
Control panel
Remote control
(Main unit side)
AUTO
KEYSTONE
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE SET VOL/ADJ.
L-CLICK R-CLICK
4-b
VOLUME/ADJUST
ENTER
MENU
5
MENU ENTER EXIT
ON/STANDBY
PIP FREEZE
RESIZE
CALL MUTE
TEMP LAMP
BUSY
When selecting setting items other than "Language" in step 3.
4-b
AUTO
SET
4-b
EXIT
5
INPUT
5
ON
FAN
Notes
• If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
made are automatically stored in the memory. If the power cord is unplugged or if a power
failure occurs while the projector is on, the adjustments or settings are not stored in the
memory.
• The "Display" settings are applied to all the input sources. (It is impossible to store different
settings for each input source.)
Press VOL/ADJ (+/-) to adjust and set.
No signal background (Setting of screen of no signal input)
Logo: The TOSHIBA logo screen is displayed.
Blue background: The entire screen is blue.
None: The screen is black.
Icon
When set to "Off", the icons displayed normally when the input is
changed or other operations are performed, are no longer displayed.
Menu position
Select the position where the menu is displayed ("Upper left", "Upper
right", "Bottom left" or "Bottom right").
Menu background translucent
When set to "On", the menu background becomes translucent.
Start-up screen
When set to "On", the opening screen is displayed when the power is
turned on.
After the settings are finished, press EXIT.
EXIT
The menu screen disappears.
EXIT
66
CONTENTS