Toshiba TLP-X10U Owner's Manual page 59

FULL MENU adjustments and settings – Picture (continued)
Control panel
Remote control
(Main unit side)
AUTO AUTO
KEYSTONE SET
INPUT ON/STANDBY
LASER
AUTO
KEYSTONE SET VOL/ADJ.
L-CLICK R-CLICK
VOLUME/ADJUST
ENTER EXIT
3-c
MENU INPUT
3-c,
MENU ENTER EXIT
ON/STANDBY
PIP FREEZE
4
RESIZE
CALL MUTE
TEMP LAMP ON
BUSY FAN
3-c
EXIT
EXIT
3-c
4
EXIT
3-c,4
EXIT
Notes
• If the power is turned off by pressing the ON/STANDBY button, the adjustments or settings
made are automatically stored in the memory. If the power cord is unplugged or if a power
failure occurs while the projector is on, the adjustments or settings are not stored in the
memory.
• The adjustments or settings are stored for each of the items marked "O" in the table in step 2.
(It is impossible to store adjustments for each video mode or signal format.)
Interval (Memory card input)
Select the display interval (time) for the auto. demo and auto. slide
show. (10 sec., 30 sec., 3 min. or 10 min.)
Depending on the compression format of the JPEG files, it may take
more time than the setting value.
Press EXIT to return to the FULL MENU.
After the adjustments and settings are finished,
press EXIT.
The menu screen disappears.
59
CONTENTS