Disconnecting The Main Wiring Harnesses - Epson Stylus COLOR 900 Service Manual

EPSON Stylus COLOR 900/900N
Control Panel
FFC for the
Control Panel
Figure 4-3. Control Panel Removal
Chapter 4 Disassembly and Assembly

4.2.2 Disconnecting the Main Wiring Harnesses

1. Remove the upper case. (See
2. Remove the three screws securing the shield plate bracket to the
right side of the printer, and then remove the bracket.
3. Unlock the cable clips securing the two printhead control FFCs, and
then disconnect the FFCs from the C265 main board.
Figure 4-4. Printer Mechanism Removal
page 91.)
Cable Holder
Relay Board
Shield
Plate
Bracket
Printhead FFCs
Control Panel FFC
92