EPSON Stylus COLOR 900/900N
7. Remove the three screws securing the top frame (two in the front
and one in the rear as shown in the figures below), and then remove
the top frame.
Screws securing the Top Frame
Top Frame
Figure 4-51. Top Frame Removal (1)
Screw securing the Top Frame (back of printer)
Figure 4-52. Top Frame Removal (2)
Chapter 4 Disassembly and Assembly
4.2.8.17 Paper End (PE) Sensor Removal
1. Remove the top frame. (See
2. Release the two locking tabs securing the PE sensor to the top
frame, slide the sensor upward, and then remove the sensor.
Locating Holes
Figure 4-53. PE Sensor Removal
page
115.)
Locking Tabs
116