Step3 Select The Destination Repeater ("To"); Step4 - Icom ID-51A Basic Instructions

New2001 New2001
Push D-pad( !) to select the
e
repeater group where your
access repeater is listed, and
then push D-pad(Ent).
Push D-pad( !) to select your
r
access repeater, and then
push D-pad(Ent).
New2001
1
ACCESS THE REPEATER
Select the Destination repeater ("TO")
STEP 3
Example: Your destination repeater is Hamacho/Japan in the
repeater list.
Push D-pad( %) to select "TO"
q
(Destination repeater), and
then push D-pad(Ent).
D-pad
(Ent)
( )
Push D-pad( !) to select se-
w
lect "Gateway CQ," and then
push D-pad(Ent).
Repeater area Repeater
call sign
Go to step t
"TO" is selected.
Go to step e
Go to step e
ACCESS THE REPEATER
If the selected repeater name
t
is displayed in "FROM" on
the DR mode screen, the ac-
cess repeater setting is com-
pleted.
sign, its frequency, duplex setting, frequency offset and
Gateway call sign are automatically set.
your transceiver's preprogrammed list.
Push D-pad( !) to select the
e
repeater group where your
destination repeater is listed,
and then push D-pad(Ent).
Push D-pad( !) to select your
r
destination repeater, and
then push D-pad(Ent).
1
Completed
Completed
Continued on the next page
Go to step t
1
18
New2001