Step2 Displaying Your Position; Gps Logger Function; Step1 Receiving Gps Data From The Internal; Gps Receiver - Icom ID-51A Basic Instructions

New2001 New2001
STEP 2 Displaying your position
Confirm the GPS icon is dis-
played on the LCD.
Push [QUICK]
q
w Push D-pad(!) to select the
"GPS position" item, and then
push D-pad(Ent).
D-pad
(Ent)
( )
e The first MY GPS position
screen appears. (1/5)
New2001
12

GPS LOGGER FUNCTION

The GPS Logger function allows you to store the GPS position
data (Latitude, Longitude, Altitude, Positioning state, Course,
Speed and Date) onto a microSD card, as your route.
ing course on a mapping software.
Receiving GPS data from the internal
STEP 1

GPS receiver

q Push [MENU]
the Menu screen.
Push D-pad( !) to select the
w
root item (GPS), and then
push D-pad(Ent) to go to the
next level.
D-pad
(Ent)
( )
( MENU > GPS > GPS Set>
GPS Select)
Refer to the menu sequence
e
shown directly above and
push D-pad(!) to select, and
then push D-pad(Ent) to en-
ter, one or more times until
the last screen is displayed.
45
to enter
to enter
Go to step r
<Contents of the GPS Position screen>
The top of the
compass is North.
Your course head-
ing is Northwest.
Your course head-
ing is 306 degrees.
Shows the dis-
GPS Position screen (MY)
played position
is yours.
NOTE:
The GPS logger function requires a microSD card.
-
Push D-pad( !) to select "In-
r
ternal GPS."
t Push [MENU] to exit the
Menu screen.
ceiving data, as illustrated be-
valid data is received.
- If "Manual" is selected, the icon
does not appear.
to receive, but depending on the
minutes. If you have difficulties
receiving, we recommend that
you try a different location.
11
GPS OPERATION
Latitude
Longitude
Grid Locator
Altitude
Speed
Time
that the
displayed
data was
acquired.
How convenient!
position and altitude!!
-
11
44
New2001 New2001