Terminal Assignment For Sc13 - Siemens SIMADYN D Hardware Manual

Aotewell Ltd

5.2.2.2 Terminal assignment for SC13

Terminal
assignment,
interface module
Hardware - SIMADYN D
Edition 12.2004
HongKong|UK|China
www.aotewell.com
At the particular cable ends, only certain signal types are available, where
only the correct interface modules can be used:
Interface Screw Significance
module terminal
(x=1...8)
SB10 1:1 screw terminal
x Signal
5x Reference potential (ground or P24)
SB60
Binary inputs 115/230 V
x1
Ground
x2 Binary input 115 V
x4 Binary input 230 V
SB61
Binary inputs 24/48 V
x
Binary input 24 V
1x
Binary input 48 V
5x
Reference
SB70 Binary outputs (relay)
x1 Common (center contact)
x2 NC contact
x4
NO contact
SB71 Binary outputs (transistor)
x Signal
5x Ground
Table 5-8 Terminal assignment, interface module
sales@aotewell.com
Industry Automation
Input/output modules
5-11
+86-755-8660-6182
5