Technical Data - Siemens SIMADYN D Hardware Manual

Aotewell Ltd
NOTE
2.3.7

Technical data

Input voltages
Output voltages
Hardware - SIMADYN D
Edition 04.2011
HongKong|UK|China
www.aotewell.com
 The screens of screen cables must be directly connected to the
grounding- or screen rails and fed to the interface modules, still
screened.
Additional information regarding EMC and the ambient conditions, refer
to Section „General technical data"!
AC power supply according to DIN IEC 38
(can be set using the voltage selector switch)
AC 115 V
Input voltage range ±10%
Input frequency 47-63 Hz
Input current 0.8 A
Non-periodic overvoltages acc. to DIN VDE160, A5.3.1.1.2
Voltage
Duration
Recovery time, min
Events per hour
Brief voltage dips acc. to DIN VDE 0160, A5.3.1.1.3
Voltage
Duration
Recovery time, min
Events per hour
Output voltage 5 V
Output current
Ripple
Commutating spikes
Overvoltage protection
Stabilization time
Output voltage +15 V
Output current
Ripple
sales@aotewell.com
Supply voltages
AC 230 V
±10%
47-63 Hz
0.4 A
460 V
1.3 ms
0.1 s
max. 10
0 V
5 ms
0.1 s
max. 10
+5.1 V +/- 0.1 V
3 A
< 50 mV ss
< 5% (of 5V)
With suppressor diode,
to protect the modules
< 80 ms after U in = 230 V;
<1 ms
after a load step (0.5 ->1)*I rated
+15 V +/- 0.3 V
0 to 0.5 A
< 150 mV ss
Industry Automation
Subracks
2
2-29
+86-755-8660-6182