End Of System Operation; Parameterizing The Display Options; Self-Test - Siemens SIMADYN D Hardware Manual

Aotewell Ltd
10.4.6
10.4.7
10.4.8
Hardware - SIMADYN D
Edition 03.2001
HongKong|UK|China
www.aotewell.com

End of system operation

SYSTEM operation is terminated by selecting END and depressing the
ENTER key.
END
Enter
END

Parameterizing the display options

PRINTER
Enter
Languages
CONTRAST

Self-test

The user can test all of the OP2 sub-components using the self-test. The
self-test function can only be accessed from system operation.
sales@aotewell.com
Operator control panel OP2
MESSAGE VALUE
PRINTER END
CURSOR
Function selection
Description:
If the BUS has to be re-initialized to SIMADYN D,
"YES" should be entered, otherwise, "NO".
Display:
INIT REQUEST
YES
CURSOR
Enter
Transfer
Function selection
MESSAGE VALUE
PRINTER END DISPLAY-OPTIONS
CURSOR
Function selection
Description:
Selects the OP2 system message languages (the menu language in
"SYSTEM operation" is always English).
D = German, I = Italian, F =French, E = Spanish
Display (Example):
LANGUAGE
D
Enter
Transfer
Description: CONTRAST display setting
Display:
CONTRAST
1
Enter
Numerical
Transfer
keypad
Value input
Industry Automation
USS-INTERFACE
DISPLAY-OPTIONS
YES NO
USS-INTERFACE
DISPLAY-OPTIONS
ENGLISH D I F E
CURSOR
Function selection
DISPLAY-OPTIONS
0...15
10-15
+86-755-8660-6182
10