Subrack Srt400; Power Supply - Siemens SIMADYN D Hardware Manual

Subracks
2.3

Subrack SRT400

Order No.
Description
Number of slots
2.3.1

Power supply

Front panel
elements
Supply connection
2-26
www.aotewell.com
Order No. Supply voltage
6DD1682-0CG0 AC 115/230 V
SRT400 is a compact subrack for open-loop and control tasks that have a
technological orientation.
It is comparable with the electronics box of the SIMOVERT
MASTERDRIVES. The following boards can be inserted in the SRT400.
 up to two T400 technology boards
 one T400 and one MASTERDRIVES communications board (e.g. CB1,
ADB, ...)
In addition to the T400, no other SIMADYN D boards can be inserted in the
subrack. Using these components, for example, functions can be expanded
at a reasonable price and existing plants/systems modernized.
The drives can be controlled via analog or serial interfaces - such as
Profibus DP, USS or peer- to -peer.
The power supply is a plug-in unit and is permanently located in the
righthand slot of the subrack. It is interlocked using screws so that it cannot
slide out. It is self-ventilated.
It cannot be separately ordered.
 Green LED: Error-free operation
 Connection for the line supply voltage
 24V supply for the digital (binary) outputs of the T400
 Voltage selector switch (115 V / 230 V)
The incoming line supply voltage 115V/230V is connected through a 3-pin
screw terminal.
The connection assignment is stamped on the front plate:
Line supply Significance
connection
Protective conductor
L Phase conductor
N Neutral conductor
It is possible to toggle between rated input voltages of 230 V and 115 V
using the voltage selector switch (slide switch).
sales@aotewell.com
Industry Automation
Fan Power supply type
no Integrated
Hardware - SIMADYN D
+86-755-8660-6182
Edition 04.2011