Download Print this page

Getting Started - Vax Platinum PowerMax ECB1SPV1 Manual

Hide thumbs Also See for Platinum PowerMax ECB1SPV1:

Advertisement

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
IMPORTANT: Carpets should be dry vacuumed thoroughly before washing.
• Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/rugs/
upholstery, gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with white
paper towel or cloth. Check all carpets/rugs/upholstery material before first use and if your carpet has more than
one colour, check all colours.
• Test all carpets/rugs/upholstery before full usage. Run the carpet washer over a small hidden area. If no damage or
pile distortion occurs continue cleaning.
• When cleaning an entire room, move furniture out of the area to be cleaned. If the furniture cannot be moved,
place aluminium foil or wax paper under the legs. This will prevent wood finishes from staining your carpet. Pin up
furniture skirts and curtains.
• When using the carpet washer, basic safety precautions should always be observed and don't over saturate
your carpets.
• Only use Vax carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee.
• The clean water tank should only be filled with warm water (max 40�C). Filling the clean water tank with hot/
boiling water will damage your machine and invalidate the guarantee. This is a powerful carpet washer, before
plugging in make sure all controls are turned off also hold carpet washer firmly when staring and during use.
Assembling your carpet washer
Stand the base of the carpet
washer on the floor in the
upright position. Line up the
handle with the main body
and push into place.
Line up the SpinScrub tool
with the holder and slide the
tool downwards into place.
Turn handle lock dial
clockwise to lock
in position.

Getting started

Assemble the tanks by tilting
and lining up the front of
the tank to the washer and
pushing the tank back until
it clicks into place.
Slide the SpinScrub tool
holder over and down
the handle.

Hide quick links:

Advertisement

loading