Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Vax Edge Pet & Car CLUP-EGKS
Summary of Contents for Vax Edge Pet & Car CLUP-EGKS
- Page 1 VAX Edge Pet & Car Cordless Vacuum User Guide CLUP-EGKS CLUP-EGBC...
- Page 2 • The brushbar in the floorhead and mini motorised pet tool constantly rotates when activated. Never use on one spot for any prolonged period of time as this may damage the floor surface. Vax Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK...
- Page 3 Battery safety precautions • Replace the battery with a Vax ONEPWR battery only. Use of another battery may present a risk of fire or explosion. • Don’t attempt to disassemble the battery, remove any component projecting from the battery terminals and do not dispose of in a fire.
- Page 4 Welcome to the Vax family! You are now the proud owner of a VAX Edge Pet & Car. Here, you’ll find everything you need to know about your machine and, most importantly, instructions on how to get started so that you can get cleaning!
-
Page 5: Quick Start
HARD FLOOR vax.co.uk/contact Switch on the machine and select a mode. This user guide can be found online at: CARPET support.vax.co.uk HARD FLOOR CARPET BOOST Increases suction † Registration required. Terms and conditions apply, see vax.co.uk for details. -
Page 6: Warranty
Warranty and technical Warranty If a Vax machine is used in the way it is intended and it breaks down within the guarantee period, it’s our responsibility to repair or replace it. Here’s what isn’t covered: • Normal wear and tear of consumable items, for example: belts, filters, brushrolls, fuses etc. -
Page 7: Getting Started
Getting started THIS MACHINE IS ONLY TO BE USED WITH VAX ONEPWR BATTERIES AND CHARGER. PLEASE READ THE SAFETY GUIDE BEFORE USE. Charging the battery NOTE: Before first use, ensure the battery is fully charged. Failure to fully charge the battery before first use may result in poor battery performance. -
Page 8: Operation
Getting started Operation CAUTION: The brushbar and brushroll in the floorhead and the brushbar in the mini motorised pet tool constantly rotates when activated. Never use on one spot for any prolonged period of time as this may damage the floor surface. To prevent any damage being sustained test on an inconspicuous area of the flooring first. - Page 9 Getting started Using the hose and tools IMPORTANT: Hold the machine by the carry handle at all times when using the hose or when used on stairs. Hold the machine by the carry handle at Press the hose release clip and pull to Push the chosen accessory to the end all times when using the hose or when remove the hose from the hose holder.
- Page 10 Getting started Using the mini motorised pet tool IMPORTANT: If the brushbar in the mini motorised pet tool has been obstructed, the motor protection sensor may activate and the brushbar will stop. Switch off the machine, remove the tool from the hose and clear any obstruction.
-
Page 11: Cleaning And Maintenance
Cleaning and maintenance Emptying the dirt container IMPORTANT: Always switch off the machine before performing maintenance or troubleshooting checks. CAUTION: Don’t over fill the dirt container to avoid blocking the air flow through the machine. For best results empty after every use. Press the dirt container release button and pull to remove the dirt container. -
Page 12: Cleaning The Pre-Motor Filter
Cleaning and maintenance Cleaning the pre-motor filter IMPORTANT: For best cleaning results, the filters should be tapped over a bin every 4-6 uses to remove dirt/debris. The pre-motor filter should be washed every 3 months (depending on the level of use) and replaced every 9-12 months. Ensure all filters are in place before using the machine. - Page 13 Cleaning and maintenance Cleaning the separator Lift and remove the separator out of the Push the tab up on the lid of the dirt container and lift to open the cover. dirt container. Using a soft brush remove any dirt/debris from the separator. Refit the separator making sure that the semi circular tab on the separator fits into the groove on the dirt container.
- Page 14 Cleaning and maintenance Post-motor filter maintenance IMPORTANT: The post-motor filter is designed to offer long life with no maintenance. The filter should be checked periodically and when heavily discoloured it should be replaced. Do not wash, scrub or brush the post-motor filter as this will damage the filter. Ensure all filters are in place before using the machine.
- Page 15 Cleaning and maintenance Removing and cleaning the floorhead brushbar IMPORTANT: If the brushbar or brushroll has been obstructed, the motor protection sensor may activate. The brushes will stop and the light on the powered floorhead will illuminate red. Switch off the machine, clear any obstruction and wait 1 minute before reactivating.
- Page 16 Cleaning and maintenance Removing and cleaning the floorhead brushroll Using a coin, push and turn the Hold the tab and pull away the Pull to remove the end cap and brushroll cover to the unlock symbol. brushroll from the brush housing. slide any hair and threads off the NOTE: The brushroll cover cannot end of the brushroll.
- Page 17 Cleaning and maintenance Removing and cleaning the mini motorised pet tool brushbar IMPORTANT: If the brushbar in the mini motorised pet tool has been obstructed, the brushbar motor protection sensor may activate and the brushbar will stop. Switch off the machine, remove the tool from the hose and clear any obstruction.
-
Page 18: Checking For Blockages
Cleaning and maintenance Checking for blockages Press the dirt container release button and pull to remove the dirt container. Press the hose release clip and pull to remove the hose from the hose holder. Drop a small ball of paper into the top of the hose. -
Page 19: Troubleshooting
Troubleshooting WARNING: Always switch off and unplug the machine before performing any checks or maintenance. There is an accessory missing • Check the contents on the box to make sure the part is definitely included with your machine. Why does the machine have no power? •... - Page 20 Notes...
- Page 21 Notes...
- Page 22 For how-to videos and warranty registration visit www.vax.co.uk info@vax.co.uk vax.co.uk Vax Ltd, Artillery House, Heritage Way, Droitwich, WR9 8YB, UK.