Advertisement
Using the pre-treatment wand
Pre-treating your carpet before washing will help to remove stubborn stains. Do not saturate your carpet.
Pour the required amount
of pre-treatment solution
into the tank.
Push the wand connector
into the solution tube port.
Fill the clean water tank
with warm water
(max 40°C).
Plug into the mains and
press the On/Off button
to switch on.
Using your machine
Turn the wash/rinse dial
to 'wash'.
Press and hold the trigger
on the pre-treatment
wand, spraying evenly
over stubborn atains
Pull down the accessory
hose connector cover.
Leave the solution for
10-15 minutes before
washing carpet.
Hide quick links:
Advertisement
