Vax Platinum PowerMax ECB1SPV1 Manual page 16

Taking care of your machine
Removing and cleaning the brushbar
Using a crosshead
screwdriver, undo the 2
screws and remove the
belt guard.
Pull and slide the right side
brushes together with the
brushbar. Remove the side
cap from the brushbar and
unloop the brushbar from
the belt.
Attach the other side
of the brushbar to the side
brushes. Slide onto the side
of the base and into place.
Using a crosshead screwdriver remove the 4 screws
on the side brushes and the top and bottom screws
from each of the rug guards (metal pins) to get access
to the brushbar.
Using a pair of scissors,
remove any threads or hair
caught around the brushes.
Rinse under water to
remove debris.
Refit the belt guard and tighten the 2 screws. Replace and
tighten the 4 screws on the side brushes and refit the rug
guards tightening the 4 screws to secure.
To refit, loop the brushbar
through the belt and onto
the belt grip.
Pull and slide the left side
brushes and remove the
side cap from the brushbar.
Line up the 'right' side
brushes with base and slide
into place. Attach brushbar
to side brushes.