Advertisement
Quick Links
Here is what you can do to keep your appliance performing at its
best.
How do I access the brushbar?
Accessing the belt and brushbar
wall socket
Troubleshooting guide
Switch the machine off and unplug from the
Remove the tanks and lie the machine back
Remove the 8 screws underneath
Advertisement
Related Manuals for Vax ECR2V1P
Summary of Contents for Vax ECR2V1P
- Page 1 Troubleshooting guide Here is what you can do to keep your appliance performing at its best. How do I access the brushbar? Accessing the belt and brushbar Switch the machine off and unplug from the wall socket Remove the tanks and lie the machine back Remove the 8 screws underneath...
- Page 2 Lift the belt cover off If damaged, remove the belt Replace with new belt How do I clean the dirty water tank? Cleaning the dirty water tank Press the release button and pull to remove the dirty water tank...
- Page 3 Unplug the cap and empty the tank Rinse with warm water Allow the tank time to dry Is there a high pitched noise coming from the machine? The machine has a float in the dirty water tank that is designed to rise with the level of the water.
- Page 4 Water released? A replacement clean water tank is required, go to 'Spares' tab above Yes? Re-fit the clean water tank back on the machine and try again Has the machine been without power for over 24 hours? Have you changed the fuse? If not, please replace the fuse in the plug with another 13 amp fuse Is the brushbar not turning? Switch the machine off and unplug from the wall socket...
- Page 5 Place your hand over the rectangular hole located on the machine, where the dirty water tank fits Suction strong? Yes? Go to 'Have you checked the nozzle?' Have you checked the nozzle? Debris from the carpet can build up in the front nozzle. To prevent this happening, throughly vacuum the carpet before using the machine Debris in nozzle? Remove the dirty water tank and rinse the nozzle with warm water to clear any...