Pcmcia Interface Board (B-9700-Pcm - Toshiba TEC B-SX4T Series Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
NOTE: In case of the B-SX5T or the B-SX4T that the optional Expansion I/O board (B-7704-IO-QM) has
been installed in, remove the expansion I/O board from the printer temporarily using the following
procedure.
(1) Disconnect the Expansion I/O cable from CN1 on the Expansion I/O board.
(2) Remove the two B-3x6 screws to detach the Expansion I/O board from the printer.
Rear Plate
B-3x6 Screw
4) Firmly connect CN101 on the PCMCIA interface board directly to CN7 on the Main PC board.
PCMCIA Interface Board
5) Secure the PCMCIA interface board to the rear plate with the two SM-3x6 screws.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Main PC Board
Rear Plate
SM-3x6 Screw
4.5 PCMCIA INTERFACE BOARD (B-9700-PCM-QM)
CN101
4-23
EO18-33012B
Expansion I/O Board
CN1
Expansion I/O Cable
CN7