Toshiba TEC B-SX4T Series Maintenance Manual page 215

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
5. Refer to Steps 5 and 6 in "(1) When using RFID tags other than short-pitch type" and attach the
Antenna Cover, to which the Shield Sheet was attached in Section 4.24.3.1, to the Antenna Frame with
the SMW-3x6 screws.
SMW-3x6 Screw
6. Go to Section 4.24.3.4 and attach the RFID Module.
4.24.3.4 Attaching the RFID Module
1. Attach the Cable Clamp to and fit the Bush into the positions shown in the picture below.
2. Pass the Antenna Cable through the Bush, and fasten the cable with the Cable Clamp.
Cable Clamp
Antenna Cable
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
4.24 RFID MODULE (B-SX704-RFID-U2-US-R)
4-198
EO18-33012B
(Revision Date Feb. 6, 2009)
Antenna Cover
(with Shield Sheet)
Cable Clamp
Bush
Bush