Removing The Operation Panel - Toshiba TEC B-SX4T Series Maintenance Manual

3. NOTE FOR OPTIONAL EQUIPMENT INSTALLATION/MAJOR UNIT REPLACEMENT
/MAINTENANCE

3.4 REMOVING THE OPERATION PANEL

1) Open the top cover. (Refer to section 3.1.)
2) Remove the side panel (L) from the printer. (Refer to section 3.2.)
3) Remove the SMW-4x8 screw that secures the operation panel ass'y.
SMW-4x8 Screw
4) Fully open the top cover, otherwise the operation panel ass'y is stuck on the tab and cannot be
removed from the printer.
Operation Panel Ass'y
5) Lift the operation panel ass'y to release the hook, and then remove the operation panel ass'y by
moving it forward.
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
Tab
3.4 REMOVING THE OPERATION PANEL
Top Cover
3- 5
EO18-33012B