Toshiba TEC B-SX4T Series Maintenance Manual page 201

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
The following parts have been added to the kit. (Serial Number 2809Axxxxxx or later)
Certification Sticker (for Taiwan only), (1 sheet)
Notes:
1. The precaution sheet is exclusive to Taiwan. Please certainly pass the document to end users for
the use of the product in Taiwan.
2. The certification data sheet is exclusive to Korea. Please certainly pass the document to end users
for the use of the product in Korea.
4.24.3 Installation Procedure
4.24.3.1 Preparation for Use of Short-Pitch RFID Tags (20mm)
When short-pitch tags (20 mm) are to be used, the Antenna Ass'y and the Antenna Frame need to be
converted before installing an RFID module in the printer, for proper read/write operation. When short-pitch
tags are not used, skip this section and go to Section 4.24.3.2.
1. Remove the two Tapping Screws to detach the Antenna from the Antenna Ass'y.
Tapping Screw
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es
4.24 RFID MODULE (B-SX704-RFID-U2-US-R)
Precaution Sheet
(for Taiwan only),
(1 sheet)
4-184
EO18-33012B
(Revision Date Feb. 6, 2009)
Certification Data
Sheet
(for Korea only),
(1 sheet)
Antenna
Antenna Ass'y