Siemens SINAMICS G120P Hardware Installation Manual page 17

Table 3- 1 Dimensions and distances
Frame Size
FSA filtered /unfiltered
FSB filtered /unfiltered
FSC filtered /unfiltered
FSD unfiltered
FSD filtered
FSE unfiltered
FSE filtered
FSF unfiltered
FSF filtered
Fixing: FSA/FSB: Screws M4, 2,5 Nm
FSC: Screws M5, 3 Nm
Using a screen termination kit:
1)
FSA: + 80 mm; FSB: + 78 mm; FSC: + 77 mm; FSD, FSE, FSF: + 123 mm
plus 58 mm using a CU230, plus 40 mm using a CU240,
2)
plus another 10 mm or 25 mm using a BOP-2 or an IOP as Operator Panel (OP)
The Power Modules can be mounted side-by-side. Due to tolerance reasons, we recommend a lateral distance of about
3)
1 mm
Mounting the shielding plate
Figure 3-2
Power Module PM230, IP20 / Push through
Hardware Installation Manual, 03/2012, A5E03448282B AA
Dimensions (mm)
Height Width
1)
196 73
292 100
355 140
419 275
512 275
499 275
635 275
634 350
934 350
Mounting the shielding plate, FSA ... FSC
Depth a
2)
165 186
165 281
165 343
204 325
204 419
204 405
204 541
316 598
316 899
FSD/FSE: Screws M6, 6 Nm
FSF: Screws M8, 13 Nm
Installing/Mounting
3.3 Mounting the Power Modules
Distances (mm)
b c Waste
heat
62.3 6
80 6
120 6
235 11
235 11
235 11
235 11
300 11
300 11
3)
Cooling
air
80 100
80 100
80 100
300 300
300 300
300 300
300 300
350 350
350 350
17