Installing The Unit - Triax TMB 100 Manual

Pregrammable Amplifier
TMB 100, 100-1 & TMB 100S
I n s t a l l i n g t h
I n s t a l l i n g t h
I n s t a l l i n g t
We recommend you install the unit in a sufficiently ventilated place. Natural ventilation must be able
to occur through the ventilation grids; leave a minimum space of 15 cm around the unit to ensure
maximum ventilation. When installing or cabling the unit, we recommend you disconnect the
mains power cable.
Connecting the unit
Note: UHF inputs are remotely supplied and protected against short circuits. The power available is
12 or 24V, 50mA max. The preamplifier is detected automatically; only the remote power voltage
can be programmed.
e u n i t
e u n i t
h e u n i t
Entrée Entrada
Inputs BI-FM BIII
BI/FM BIII/DA
Display
Earthing
connector
Output
Entradas
UHF Interface RS232
UHF1 UHF2
Sat input
Conector
Datos
Keypad