Table of Contents
Advertisement
Mount Hose Glycol/Water Heater
1. Mount the heater (ordered separately) to heater
bracket (13) with screws and washers supplied with
heater.
2. Add the heater inlet fitting elbow (6) to the heater.
Align the port to the back.
3. Loosen the heater outlet swivel fitting and rotate the
thermometer block to a vertical position.
3A5314B
4. Attach elbow fitting (7), tubing (8), and fitting (10).
Align fitting (7) as shown.
5. Mount heater assembly to the straight section of the
cart frame using plate (14), screws (15) and nuts
(16).
Installation
11
Advertisement
Table of Contents
