Table of Contents
Advertisement
Installation
Grounding
The equipment must be grounded. Grounding
reduces the risk of static and electric shock by provid-
ing an escape wire for the electrical current due to
static build up or in the event of a short circuit.
Connect pump ground wire to frame using screw (21).
Husky 205 Pump
The pump is conductive plastic and is grounded with a
ground wire connected to the XP or XP-hf frame.
24
221
Connect the Pump Air Line
1. Remove cap (220) from XP or XP-hf air manifold.
2. Connect the air hose from the air manifold to the
pump needle valve fitting (211).
XP AIR SECTION
XP-hf AIR SECTION
ti32090a
3A5314B
Advertisement
Table of Contents
