Initial Setting Of The Heading Angle - [Gyro I/F] Button - JRC JCY-1900 Instruction Manual

4.7

Initial Setting of the Heading Angle - [Gyro I/F] Button

If the ship's heading angle data input the synchronous or step signals and the ship's speed data
input the pulse signals, the DAU is required. The gyro interface board is optional.
[NOTE]
If the DAU is added, the CAUTION alert occurs until set the ship's heading angle.
1. Tap the [Gyro I/F] button on the HOME screen. The GYRO SETUP screen is displayed.
Figure 4-55 CAUTION: Gyro I/F uninitialization
HOME screen
GYRO SETUP screen
Figure 4-56 GYRO SETUP screen
Chapter 4 Operation Method
63