JRC JCY-1900 Instruction Manual page 65

The dialog box of alert contents is displayed in the following case:
- If new alert occurs.
- If the alert button taps.
If new alert occurs, the dialog box of alert contents is displayed automatically.
Alert state icon
Function
[ACK] button - Only if the WARNING alert occurs, this button is displayed.
(for the - If the WARNING alert is not acknowledged, this button is enabled.
WARING alert - Taps this button and acknowledge the WARNING alert. If so this button is disabled.
only) - If the multiple WARNING alerts occur, the next WARNING alert is displayed automatically.
Alert state
icon
WARNING
alert state
icon
CAUTION
alert state
icon
Switching Switches the alert contents.
button [ACK] button (for the WARING alert only)
Alert number [The alert number] / [The alert total number]
Close button Closes the dialog box.
Alert details - Cause: indicates the cause of alert.
- Detect: indicates the date and time that the alert occurred.
- Details: indicates the contents of alert.
[ACK] button Switching button
Figure 4-12 Alert detail display dialog box
Table 4-5 The dialog box of alert contents
: This icon shows that the WARNING alert is not acknowledged.
: This icon shows that when the WARNING alert is not acknowledged, the
alert was silenced by alarm management system.
: This icon shows that the WARNING alert was acknowledged.
: This icon shows that when the WARNING alert is not acknowledged, the
alert was solved.
: This icon shows that the alert was transferred to alarm management system
Chapter 4 Operation Method
Close button
Dialog box of alert
contents
Alert contents
Description
29