Operations Using The Rotary Knob - JRC JCY-1900 Instruction Manual

4.9

Operations Using the Rotary Knob

Explains the on-screen operations by using the rotary knob.
If the touch panel breaks down and can't be operated, uses the rotary knob.
1. Hold down the rotary knob for 5 seconds.
If the rotary knob is held down for 5 seconds, the function of rotary knob changes from the
"Dimmer mode" to the "Operation mode". In the operation mode, the cursor is displayed on the
screen.
[Information]
In the "Operation mode", the screen brightness can't adjust by the rotary knob.
Cursor
2. Move the cursor.
To move the cursor, turning the rotary knob to the left or right.
3. Select the button, and execute.
Move the cursor on the desired button, and press the rotary knob.
4. To return the touch panel operation, push the HOME button.
Figure 4-77 Display in the operation mode
Chapter 4 Operation Method
77