Ncg-1900 Operation Panel Unit - JRC JCY-1900 Instruction Manual

2.2

NCG-1900 Operation Panel Unit

Figure 2-3 Name of each part of the Operation Panel Unit (OPU)
Table 2-3 Name and function of each part of the OPU
No. Name
1) Touch panel
2) Speaker
3) Rotary knob
4) HOME button
5) USB port
Tapping the touch panel, can operate the VDR system.
- 7-inch wide Liquid Crystal Display
- Resolution: WVGA 800 x 480 pixel
Sounds the alert sound and plays back the recorded
conversation.
[Information]
The alert sound level can't adjust.
The rotary knob can adjust the screen brightness.
Furthermore, when touch panel failed, the OPU operate with
the rotary knob.
[Information]
If the rotary knob is held down for 5 seconds, the function
changes into the rotary knob operation mode. In the rotary
knob operation mode, the OPU can't operate with the touch
panel.
If you would like to return to HOME screen, push the HOME
button. Furthermore, in the rotary knob operation mode, if the
HOME button is pushed, the function changes into the touch
panel operation mode.
If you would like to copy data from internal storage, plug a
FAT32 formatted USB flash drive in this port. This port is
covered with a cap.
Chapter 2 Names and Functions
1) Touch panel
2) Speaker
3) Rotary knob
4) HOME button
5) USB port
Function
7