JRC JCY-1900 Instruction Manual page 111

Chapter 4 Operation Method
3. Enter the password and tap the [Enter] button. Data recording is stopped, and the successful
completion message is displayed.
[Information]
The factory default password is "0000". Manage the password by the ship administrator.
About how to enter a number, see "4.1.5 Number input".
Completion message
Figure 4-72 Stop data recording
[NOTE]
If the data recording is stopped, the WARNING alert occurs.
Figure 4-73 WARNING: Recording stop
[Information]
If the password is incorrect, the error message is displayed. Enter the password again.
Error message
Figure 4-74 Incorrect password error
75