Fluke ScopeMeter 190 II Series Service Manual page 78

15. Observe the trace and check if the Test Tool triggers on the negative pulse
before the marker.
16. Select the Test Tool setup and press
menu.
17. Choose
VIDEO on A...
Polarity: NEGATIVE | PAL
18. Set the calibrator video trigger output signal to -100 %
19. Use to select line number 310 (PAL, PALplus, or SECAM) or
262 (NTSC).
20. Set the calibrator format and marker line number to:
•
PAL 310 (odd) for PAL and PALplus
•
SECAM 310 (odd) for SECAM
•
NTSC 262 odd for NTSC
21. Observe the trace and check if the Test Tool triggers on the positive pulse
before the marker.
Figure 4-12. SC600 Marker Pulse
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
F4 to open the Trigger Options
and from the opened menu choose:
(or or or
NTSC PALplus
Performance Verification
Scope Input A, B, C, D Tests
)
SECAM
video-sc600.bmp
4
4-33