Removing The Moisture Sensor - Whirlpool duet GGW9200L Series Job Aid

REMOVING THE MOISTURE SENSOR

NOTE: Sharp edges may be present.
1. Turn off the gas to the dryer and discon-
nect the electrical power.
2. Open the dryer door and remove the lint
filter screen.
3. Remove the two front screws from the
outlet grille.
Lint Filter
Outlet Grille Screws
4. Remove the three inside screws from the
outlet grille.
Screw
Moisture Sensor
5. Pull the moisture sensor away from the
dryer and disconnect the black and yel-
low-red wires from the moisture sensor
strips.
Yellow-Red Wire
4-15
Outlet Grille
Screw
Black Wire
Screw