Whirlpool duet GGW9200L Series Job Aid page 22

5. Remove the two screws from the door
handle and remove the handle by pulling
straight out on it. Set the handle aside and
keep it in case you ever want to restore the
door swing to its original position.
2 Door
Handle
Screws
6. Remove the six screws that are indicated
by the arrows, shown in the illustration. Do
not remove any of the other screws.
7. Lift the inner door assembly off of the outer
door assembly and set the outer door
assembly aside.
Remove
These 6
Screws
REVERSE THE HINGE
& HINGE BRACKET
1. Place the inner door, screw head side
facing up, on the padded work surface.
2. Remove the four door hinge screws.
3. Remove the two screws from the handle
bracket and remove the bracket.
2 Handle
Bracket
Screws
4. Mount the hinge to the other side of the
door with the four screws you removed in
step 2.
5. Mount the handle bracket to the other side
of the door with the two screws you re-
moved in step 3.
6. Set the inner door assembly aside.
2-12
2 Hinge
Screws
2 Hinge
Screws