Whirlpool duet GGW9200L Series Job Aid page 25

13. Place a spirit level on the top of the pedes-
tal. Use a 1/4" (6.4 mm) hex-head ratchet
or open-end wrench, and adjust the four
feet, to level the dryer from side-to-side
and front-to-back.
14. When the dryer is level, use a 9/16" (14.3
mm) open-end wrench to securely tighten
all four feet locknuts against the pedestal.
The locknuts must be tightened.
15. Pull both drawer slides out and reassemble
the drawer to the drawer slides with the
two phillips screws.
16. Install the dividers and close the drawer.
2-15