Whirlpool duet GGW9200L Series Job Aid page 57

A PARTICULAR GROUP OF LEDS
DOES NOT LIGHT
A group or combination of LEDs share a com-
mon electronic connection. If this connection
is open, all of the LEDs in the group will be
disabled. If this occurs, replace the entire con-
sole electronics and housing.
ONE LED DOES NOT LIGHT
Press the button associated with the LED
several times. If the LED does not light, the
LED has failed. Replace the entire console
electronics and housing.
NO BEEP SOUNDS
If the associated LEDs do light up, the beeper
circuit may have failed on the machine control
electronics board.
NO DRYER FUNCTION IS ACTIVATED
WHEN A PARTICULAR PUSHBUTTON
IS PRESSED
If the associated LEDs do light up, the machine
control electronics board may have failed.
AN E3 ERROR CODE IS DISPLAYED
An E3 error code means that there is a user
interface or a software mismatch. It can also
mean that a component on the console elec-
tronics, or the machine control electronics
board has failed.
5-9